There is too much fun to be had in this stretchy Sensory Space Swing!
Made out of a double layer of super soft cotton spandex (reversible) this truly multi-functional swing encourages movement and exercise andcan be used when sitting, standing or lying down. The kids can climb in the swing, stretch out and move around inside the swing, they learn body awareness, balance, motor planning and spatial skills. A fun, private space to bounce, swing, spin or just lie motionless while enjoying the movement. A must swing for your clinic, home or school.
Comes with all the hardware for attaching to beam on ceiling. and extra eye bolt so you can have inside and outside swinging options
If ceiling is not an option, purchase our doorway swing bar!
95%COTTON 5%SPANDEX - Don't settle for single layered lycra knock offs.
80KG weight limit
Active eyes on supervision at all times
Fall and strangulation hazards if product not used correctly
Only use correct hardware that comes with the swing
Read the installation instructions carefully and follow each step
Designed for indoor use, can go outside but must be brought back inside after use
Routinely check all aspects of product for wear and damage, discontinue use it damage found
Move fabric around periodically to prevent wear in one spot
Ages 4 and up
INSTALLATION (or professional or competent handyperson)
Step 1 Locate a beam minimum 4cm wide, and a site with 1 metre radius from any objects.
Step2 Use base plate to mark holes in beam. Use 12mm bit to drill to 5cm depth into beam.
Step 3 Insert 4 bolts into holes, so metal sleeve is flush with beam. If beam can’t accommodate 4 bolts, 2 are sufficient.
Step 4 Install base plate onto bolts, and tighten to secure bolt, sleeve, and plate into beam.
Step 5 Connect carabiner to plate, thread rope through swing and carabiner, and adjust length accordingly.
Tie knot securely and enjoy!-
Instructions for tieing double rope knot to hook